When the inspector leaves the field, the report is done.
Vectro 3D is the field inspection platform where inspectors document findings directly on the 3D model of the asset: exact location, standardized data, evidence attached, and the inspection report generated in one tap. Native app, fully offline, no integration required.
Critical decisions depend on inspections. Inspections still run on time-consuming and error-prone processes.
Field inspections still run on spreadsheets, paper notes, and photos transferred at the end of the shift. The mobile apps that promised to fix it mostly digitized the checklist.
The cost shows up everywhere. Productivity drains into manual process. An error-prone workflow produces incomplete inspections. Poor data quality delays the inspector's recommendation, or worse, leads decisions the wrong way. The audit trail runs through folders, spreadsheets, and whoever remembers what that photo was. And the report, the one thing everyone downstream is waiting for, can take days to assemble after the fieldwork ends.
The inspection deserves better than what happens to it after the inspector leaves.
Findings documented on the asset, not about the asset.
Vectro 3D puts the 3D model of your asset on the inspector's tablet. Findings are marked directly on the component where they belong, with standardized condition data and photographic evidence attached at the exact location, every inspection carrying its TAG, system, inspector, and date. When the inspection is complete, the report generates itself: one tap, ready to share, in PDF or Excel formats that drop into any system your operation already uses.
No manual reporting. No days lost compiling data after the fieldwork. No finding without its place.
And it runs the way the field actually works: a native app, fully offline, no connectivity required at the site and no cloud dependency. iOS, Android, and Windows, including intrinsically safe devices for classified areas. Vectro 3D is stand-alone by design, which means it starts delivering value without an integration project standing between your team and day one.
What changes when inspections run on Vectro 3D
- Reporting time collapses: the report is generated when the inspection ends, not assembled over the days that follow
- Every finding carries its exact location and spatial context on the 3D model, so engineering acts on it without a second visit
- Standardized documentation: every inspector, the same structure, so data is comparable across teams, areas, and years
- Return inspections start from the record: the inspector opens the previous report on the same item, on the spot, and verifies whether what was reported got fixed
- Recommendations reach decision-makers while they still matter, backed by data they can trust
- Coverage multiplies: Vectro 3D was built so one inspector can deliver what used to take a team, because the field work becomes the whole work
A clean audit trail, built as the work happens: what was found, where, by whom, with evidence attached
The first look, without sending anyone to the field.
Add a high-resolution virtual walkthrough of your asset, and screening inspections move from the field to the office. Inspectors work on two screens: the walkthrough on one, navigating the asset in 4K with advanced zoom and on-screen measurement, and Vectro 3D on the other, marking findings on the model as they go.
Let us be precise about what that means. Conditions that reveal themselves visually, corrosion above all, can be assessed remotely. Whatever demands presence, a leak check, a function test, a closer look, still gets it. What changes is that the field visit becomes targeted: no work permits for a first look, no waiting out weather windows, no exposure hours spent on screening work, and your scarcest certified inspectors covering more assets from a desk, saving the field for where the field is needed.
Vectro 3D runs on the 3D model of your asset. However you get there, we cover it.
Already have a model?
Import it and deploy. Vectro 3D works with the 3D models your engineering team already maintains.
Have one that no longer matches the field?
We verify it against reality and update it, the same as-built discipline we bring to every scanning and modeling project.
Don't have one?
We scan your areas and build it, scoped for inspection from day one. And while our team is on site scanning, we can capture the virtual walkthrough that powers PRO in the same mobilization: one visit, two assets.
Either way, the model is yours, and it outlives the inspection tool. The same model that carries your findings today is the seed of your digital twin: the foundation for planning, engineering, training, and everything your operation builds on top of reality.
The Trial Project: a real area, your inspectors, a business case at the end.
We do not ask you to imagine the impact. A Vectro 3D Trial Project runs on a defined pilot area of your site, with your team doing their real work, and it is built to help you make an informed decision, not a demo.
It starts with alignment.
Before anyone mobilizes, we define success criteria and KPIs with your team, so the trial is judged against your metrics, not our slides. Permits, access, and infrastructure readiness get sorted here too.
Then the realization.
Our team scans the pilot area in a few days on site, builds the 3D model, installs and configures Vectro 3D, provides field-ready devices if you need them, trains your inspectors hands-on, and goes live on your team's actual inspection workload, with dedicated hypercare support after go-live.
It ends with numbers.
A gap analysis of your current inspection workflow, a business case with ROI built jointly on real usage data, an executive presentation, and a clean go or no-go recommendation.
Trial go-live in less than a month, or within a week if you already have the 3D as-built model. Everything the trial produces is yours to keep: the model, the data, and the business case.
One platform. Two businesses it improves.
For owners and operators.
Vectro 3D is about what does not fail. Integrity decisions are only as good as the inspection data behind them, and Vectro 3D raises the floor: accurate, located, evidence-backed field data, standardized capture, and a traceable record that stands up to audits and to time.
For inspection companies.
Vectro 3D is capacity. The hours your inspectors spend compiling reports become hours inspecting, which means more jobs delivered with the team you already have, remote screening that stretches your certified people across more contracts, and documentation that makes your next client ask why the others do not deliver like this.
For both. The same platform, the same result: field data captured at the asset, in a standard everyone downstream can trust, reports ready when the inspection ends, and a 3D model that keeps paying beyond inspections.
Frequently asked questions
Do we need a 3D model to start?
Yes, Vectro 3D works on the 3D model of your asset, and that is where its precision comes from. If you have one, we import it. If it is outdated, we update it. If you do not have one, we scan and model your areas as part of the project, and you keep the model for everything else it unlocks.
How long until we are live?
As quickly as a few days if you already have the 3D model. A few weeks if we create it for you, scanning included.
Does it integrate with our ERP, EAM, or inspection management systems?
Vectro 3D is stand-alone by design: it delivers value from day one with no integration project required, and reports export in PDF and Excel formats that any system accepts. When deeper integration matters to your operation, we deliver it as part of the project, scoped to your systems.
Can the reports follow our standard format?
Yes. We tailor the report layout to your standards, so what Vectro 3D generates is what your organization already expects to receive.
Our 3D model carries everything. How do we inspect only what we need?
Using the model's built-in hierarchy: select or deselect areas, lines, and equipment, and work only with what the job calls for.
Does it work without connectivity in the field?
Yes, fully. Vectro 3D is a native app that works entirely offline, with no cloud dependency. Industrial sites are not known for good Wi-Fi, and the platform was built accordingly.
What devices does it run on?
iOS, Android, and Windows, on the tablets and devices your teams already use, including intrinsically safe devices for classified areas. We recommend the right setup for your environment.
How long until our inspectors are productive?
Days. The workflow mirrors what inspectors already do, minus the paperwork, and we train your team hands-on, side by side, on your real assets during deployment.
Can we get engineering isometrics or 2D drawings from the model?
The inspection model is built for inspection. Detailing it into engineering isometrics or drawings is available as an additional service whenever you need it.
Who owns the data and the model?
You do. The 3D model, the findings, the reports: all of it is yours, in usable formats. That is true across everything Rysax delivers.
What does it cost?
A license that scales with your operation, and a Trial Project designed to prove the business case before you commit at scale. Bring a real area and we will scope it together.
Your next inspection could end with the report already done.
Book a demo and bring a real inspection problem: an area, an asset, a backlog. We will show you what it looks like documented on the model, and what your team's day looks like without the paperwork. Real people, real inspection experience. No chatbots.